Vaping is becoming increasingly popular, and for a good reason!
Nothing beats the convenience and simplicity of just popping a new device in your pocket when you're done with your last one.
But at the end of the day, it all comes down to that tasty vape juice inside! From sweet fruits to creamy dessert flavors, there's an endless variety of delicious types of vape juice options out there.
How do you know which ones will best suit your style?
We've got you covered; this guide offers everything you need to know about finding the best vape juice flavors for your disposable vape.
What is Vape Juice?
Vape juice, also known as e-liquid or e-juice, is a liquid you can use in vaporizers.
It typically contains a mixture of propylene glycol (PG), vegetable glycerin (VG), flavors and also nicotine. There are also nicotine free vape juices.
Ingredients
Vape juices typically contain a combination of the five ingredients:
- Propylene glycol (PG): A colorless, odorless liquid used as a base ingredient in e-liquid. It creates a throat hit similar to smoking a cigarette.
- Vegetable glycerin (VG): A clear, odorless liquid that is a base ingredient in e-liquid. It creates the vapor and provides a sweeter taste.
- Nicotine: An optional ingredient in e-liquid, Nicotine is a naturally occurring tobacco substance. It is available in different strengths like 0mg, 3mg, 6mg, 12mg, and 18mg.
- Flavors: You can add various flavors to e-liquid to create various taste options like tobacco, menthol, fruit, candy, desserts, and others.
- Distilled water or alcohol: These are sometimes added to e-liquid to thin out the mixture and make vaping easier.
Does vape juice go bad and expire?
Short answer: Vape juice can expire or go bad over time. The shelf life of vape juice depends on several factors, including the ingredients used, the nicotine content, and the storage conditions.
Vape juice that contains nicotine will have a shorter shelf life than nicotine-free e-liquid. Nicotine is a natural product that can degrade over time, especially when exposed to light or heat.
We recommend storing vape juice in a cool, dark place, away from direct sunlight and heat sources.
Similarly, e-liquid with high VG content may have a shorter shelf life as VG is a natural product that can go bad over time. High VG e-liquid should also be stored in a cool, dark place to preserve its quality.
The other ingredients used in e-liquid can also affect the shelf life. For example, fruity flavors may expire faster than tobacco or menthol flavors.
A general rule of thumb is that e-liquid can last 1-2 years if stored properly. It's essential to check the expiration date before using any e-liquid and discard any expired e-liquid.
It is also a good idea to check the color and smell of the e-liquid; if the color has changed or the smell is different than when it was first opened, it might be best to discard it.
Which vapes use vape juice?
Vape juice is used in a variety of vaping devices, including:
- Vape Mods: Vape mods are more advanced devices with adjustable settings and larger tanks for holding vape juice. They are customizable and allow users to adjust wattage, temperature, and airflow.
- Pod Systems: Pod systems are compact devices with a refillable or disposable pod that holds vape juice. They are designed for ease of use and portability.
- Cigalikes: Cigalikes are devices that resemble traditional cigarettes. They are often disposable or have replaceable cartridges containing vape juice.
- Sub-Ohm Tanks: Sub-ohm tanks are typically used with vape mods and have larger capacities for vape juice. They are designed to produce larger vapor clouds and enhanced flavor.
Nicotine Salts vs. Freebase Nicotine
Salt nicotine undergoes structural modification of nicotine, leading to smoother inhalation experiences. This enhanced smoothness renders them particularly suitable for low wattage vapes designed for tighter mouth-to-lung draws. These low-wattage devices, which encompass disposable vapes and pod mods with 25-watt outputs or lower, are commonly employed with salt nic.
Furthermore, salt nic liquids boast higher nicotine concentrations than their freebase counterparts. It's not unusual to encounter salt nic juices with concentrations ranging from 20 to 50, or even up to 60 mg.
Another point of distinction between these liquids lies in their ratios of vegetable glycerin to propylene glycol. These formulations tend to feature a higher proportion of vegetable glycerin, promoting superior compatibility with high-temperature coils. Vegetable glycerin, characterized by its low viscosity, pairs well with low-resistance coils. It vaporizes rapidly, resulting in voluminous clouds.
Typically, salt nic liquids maintain a 50/50 ratio of vegetable glycerin to propylene glycol. This composition facilitates optimal performance with high-resistance coils, culminating in a richer and more pronounced flavor profile. Propylene glycol, a viscous and sweet liquid, enhances the juice's flavor. Nonetheless, it doesn't fare as effectively with low-resistance coils.
The essential takeaways are: Freebase nicotine suits users with low nicotine tolerances or those desiring substantial vapor clouds. On the other hand, salt nic caters to users accustomed to high nicotine concentrations from cigarettes, aiming to sustain a comparable level of nicotine intake.
How do you put vape juice in a vape?
Refilling a Top-Fill Vape Tank
To refill your top-fill vape tank, adhere to the following instructions:
Step 1: Dismantle the vaporizer tank. Initiate the process by unscrewing the airflow base located at the bottom of the device. Subsequently, extract the coil from the interior.
Step 2: Apply a small amount of e-liquid to each cotton hole within the coil. Typically, a coil features six holes. Hold the coil horizontally using your index finger and thumb, and while doing so, dispense a droplet of liquid into each hole. For this task, you can use a dropper cap.
Step 3: Fill the tank with e-liquid: Start by unscrewing the upper connector of the tank, thereby revealing the liquid channels. Proceed to introduce vape juice into the tank using either a dropper or a needle tip. Cease the filling process upon reaching the horizontal indicator on the tank's side.
Step 4: Reconstruct the vaporizer: Once the tank is satisfactorily filled, fasten the upper connector, mouthpiece, and coil back into their respective positions.
Upon successfully executing the steps above, allow your vape pen to rest for approximately 3 minutes before usage. This interval ensures that the coil becomes thoroughly soaked with e-liquid prior to vaping.
Refilling a Bottom-Fill Vape Tank
To effectively refill a bottom-fill vape tank, adhere to these steps:
Step 1: Extract the coil from the base: Start this process by unscrewing the metal piece located at the bottom of the vaporizer. Subsequently, remove the coil from the tank's interior.
Step 2: Saturation of the coil with e-liquid: Following the coil's removal, introduce 2 drops of e-liquid into it using a dropper cap. Upon completing this task, reattach the coil securely to the vaporizer.
Step 3: Complete the tank filling process: Gain access to the tank by unscrewing the entire metal base of the vaporizer. Proceed to fill the tank with e-liquid, ceasing the process once you reach the designated maximum fill line.
Step 4: Reassembly of components: After successfully filling the tank, reassemble and securely screw all components back into their respective positions.
How much to consume?
The amount of vape juice you consume will depend on your vaping habits and preferences. However, there are a few general guidelines that you can follow to ensure that you are using your juice efficiently and safely.
If you are new to vaping or are trying to quit smoking, we recommend starting with a lower nicotine strength, such as 3mg or 6mg. As you become more comfortable with vaping, you can gradually increase the nicotine strength.
Every e-liquid has a recommended wattage or temperature range to produce the best flavor and vapor. It is important to follow these guidelines to ensure you are using your e-liquid efficiently and not wasting it.
Moreover, using the wrong coil for your e-liquid can cause the e-liquid to be used too quickly or not produce enough vapor. You better check the recommended coil for your e-liquid and use it accordingly.
Vaping too much can cause dry mouth, sore throat, and other negative side effects. It’s better for you to take regular breaks and drink water to stay hydrated.
Lastly, you need to track how much e-liquid you use and how often you need to refill your device. This will give you a better understanding of your vaping habits and help you to use your e-liquid more efficiently.
Juicefly Offers Vape Juice Delivery in Los Angeles
In fact, our brand, Juicefly, derived its name from vape juice! With a dedication to providing high-quality vape juice, we offer fast vape delivery service in all of Los Angeles.
Bringing the selection of the best vape juice brands in the world with competitive prices straight to your door quickly, Juicefly maintains industry-leading standards to satisfy your expectations.
You can also get vape shipping service to California, New York, New Jersey, and Texas.
FAQ
Is vape juice oil?
How should vape juice be stored?
Is vape juice compatible with all vapes?
No, vape juice compatibility can vary based on the specific type and model of the vape device.
Do vape cartridges work with any vape?
Vape cartridges are designed to be compatible with specific types of vaping devices. They are pre-filled containers that hold vape juice (e-liquid) and are commonly used with pod systems, vape pens, and some vape mods with compatible attachments.
Can you put regular vape juice in a disposable vape?
While it's technically possible to put regular vape juice into a disposable vape, we do not recommend it, and it might not work well.